You can do some simple air conditioner maintenance as a homeowner. However, it’s wiser to leave the technical inspections, evaluations, and complex maintenance procedures to the experts. Otherwise, you’ll risk yourself with mishaps that might worsen your system’s condition.
Check Your Thermostat
Check your thermostat to ensure it’s working correctly and maintaining the optimum temperature in your house. You can try going for a programmable thermostat from American Standard to replace your older thermostat.
When no one is home, a smart thermostat enables you to raise the temperature; it does not turn the air conditioner off but rather raises it. It may also cool the house down for roughly 30 minutes before you arrive home after work.
Clean Your Air Filters
We always advise our customers to replace their air conditioner’s filter or clean it if it’s reusable. You should do it during high-use seasons such as summer and winter, once a month, and once a year in the autumn and spring.
Airflow is reduced significantly when your filter gets clogged with dust, grime, and other airborne particles. As a result, your system has to work more than it needs to. As a result, the air passing through your system may become dirtier and dustier, decreasing your indoor air quality levels and even causing allergy and asthma symptoms in your family.
All you need to do is replace the air filter with a high-quality one. Smaller particles such as pollen, germs, and viruses are not captured by inexpensive fiberglass air filters, which you must replace every 30 days.
Clean your Outdoor Unit
Leaves, dirt, and grass clippings accumulate outside the air conditioner unit over time, reducing the system’s capacity and airflow. It’s also why keeping your outdoor system in good condition is significant.
To begin, turn off the power of your system. The component should then be carefully washed using a garden hose. Start at the top and work your way down, keeping the hose at a 45-degree angle.
We don’t advise using a power washer to clean the device because it may cause harm. Also, be careful not to bend or damage the coil’s fragile fins. If you need an expert’s help on this task, you 9can contact your local technician to do it in your stead.
Double Check the Wirings and Connections
The internal connections of your air conditioner are critical to its performance. What you don’t know about them might cost you money in the long run due to ineffective cooling, so inspect the outside unit’s wiring at least once a year.
Remove the access panel from the condenser unit with the power turned off and search for symptoms of overheating. For example, melted insulation on cables and blackened or burned-looking wires might be signs of this.
Examine Your Condenser’s Fan
If the fan blades on the condenser unit are damaged, your air conditioner won’t be able to chill your house effectively. That is why it is important to be aware of their current state.
To do so, switch off your air conditioner and examine the fan on top of the exterior condenser unit to see whether it’s still in excellent working order.
If one or more fan blades show cracks or chips, a certified technician should replace them. Ask your HVAC contractor for recommendations on where to find the best quality fan blades.
Contact a Professional from GO Heating & Air for Comprehensive Maintenance Check
It’s essential to get expert air conditioner tune-ups at least twice a year, especially if you’re using your air conditioning system in Dallas, TX, frequently. Before using your air conditioner during the hot summer months, you should get its components examined by a specialist from GO Heating & Air. With their maintenance services, you won’t need to worry about your system malfunctioning during the summer. The company can help you with all your cooling woes. Visit its website to learn more.